The 6000W fiber laser cutting machine refers to a fiber laser system that operates at a power level of 6000 watts. This power level indicates the laser’s ability to deliver energy for cutting through various materials effectively.
A fiber laser cutting machine of this power rating would typically possess the components and features mentioned earlier, but with a higher power output. The higher power enables faster cutting speeds and the ability to cut through thicker materials compared to lower-power laser systems.
The 6000W fiber laser cutting machine would generally be capable of cutting a wide range of materials such as metals (steel, aluminum, stainless steel), plastics, and composites. The machine’s cutting head, beam delivery system, and control panel would be optimized to handle the higher power levels, ensuring efficient and precise cutting operations.
It’s worth noting that a 6000W fiber laser cutting machine may require appropriate safety precautions due to the higher power involved. Safety features such as enclosures, interlock systems, and safety sensors would be particularly important to protect the operator and ensure safe operation.
The advantage of high power of fiber cutting allows for faster cutting and increased productivity, as well as the ability to cut more thicknesses of plate. Fiber laser cutting compared to traditional gas cutting, has the following advantages:
1, high cutting accuracy: laser cutting machine positioning accuracy of 0.05mm, repeat positioning accuracy of 0.03mm.
2, fiber laser cutting machine slit narrow: the laser beam is focused into a small spot, so that the focus reaches a very high power density, the material is rapidly heated to the degree of vaporization, evaporation to form a hole. With the relative linear motion of the beam and the material, the hole is constantly forming a narrow slit, the slit width is generally 0.1-0.2mm.
3, smooth cutting surface: cutting surface without burr, the surface roughness of the kerf is generally controlled at in not more than Ra12.5
4, cutting speed: the fastest cutting speed can reach tens of meters / min, the highest positioning speed can reach several hundred meters / min. Cutting speed is the traditional gas cutting or waterjet and other incomparable. (Affected by the laser power and the thickness of the material)
5, good cutting quality: non-contact cutting, the edge is affected by heat, the workpiece is basically no deformation, completely avoid the slump formed when the material punching and shearing, the cut generally does not require secondary processing.
6、No damage to the workpiece: the laser cutting head will not touch the surface of the material to ensure that the workpiece is not scratched.
7, not affected by the shape of the workpiece: laser processing flexibility, can process any graphics, can cut the pipe and other shaped materials.
8, fiber laser cutting machine can cut a variety of metal materials: such as carbon steel, stainless steel, aluminum alloy, brass, copper, titanium alloy, silicon steel, etc.
9, save investment in molds: laser processing without molds, no mold consumption, no need to repair the mold, save time to replace the mold, save processing costs, reduce production costs, especially suitable for large products processing.
10、Saving material: Using computer numerical control programming and layout, it can cut different shapes of products and maximize the utilization of materials.
11、Improve the speed of sample delivery: immediately after the formation of product drawings, laser processing, in the shortest possible time to get the new product in kind.
The common power segment in the previous period is 1KW-3KW, and now the cutting, if the industrial plate cutting, now the minimum start is 3KW-6KW.
Today, we will analyze together, the difference between the application of 3KW and 6KW, more helpful when you need to buy and sell the judgment.
Carbon steel bright cutting
3KW fiber laser cutting machine bright cutting thickness of about 10MM; compared with 6KW fiber laser cutting machine bright cutting thickness is much greater than the 3KW fiber laser cutting machine. 6KW cutting bright surface thickness of less than 16MM, cutting speed, good verticality.
Carbon steel full power cutting
Full power cutting is 100% power cutting. Because 6KW fiber laser cutting machine has the advantages of good electro-optical conversion efficiency, high beam quality and high power density, in practice, because 6KW fiber laser cutting machine has full power cutting, with fast cutting speed and small taper, so you can use 6KW fiber laser cutting machine to cut carbon steel material with thickness of 16-25mm.
Stainless steel cutting
The cutting speed of 3KW fiber laser cutting and 6KW fiber laser can be increased by 140%~330%%, which can effectively improve the working efficiency.
Burr-free cutting
Commonly used laser cutting machines use oxygen or nitrogen for operation. When the cross-section is not required, fiber laser cutting machine can also use air for cutting. The air is compressed through an air compressor into a storage tank. The filtered cooler is cooled and dried and ready for use, which can effectively reduce the user’s cost of use.
Cooling, on the current two popular power section, chillers have special models corresponding to cooling, the main difference is the cooling capacity, 3KW using 3 hp of cooling capacity, 6KW using 6 hp of cooling capacity, there is also a different water pump with, so in the chilled water carrier process, it is recommended that the 3KW, using about 1/2 of the water pipe can be, and 6KW, it is best to use a 1-inch water pipe
