Swing rotation in cutting

When using a rotating laser tube for cutting, the laser tube tends to swing when rotating, causing the center point to shift, which in turn causes cutting errors

This is a imprtant point when you choose CNC laser tube cutting machine or plasma cutting machine, often due to the following points

• Mechanical structure problems: The mechanical structure of the cutting machine may be loose, deformed or worn, causing the tube to oscillate as it rotates.
• Problems with the clamping system: The clamping system may not be able to hold the tube securely, causing the tube to wobble as it rotates.
• Swivel Shaft or Bearing Failure: The swivel shaft or bearing may be worn, defective, or malfunctioning, causing the tube to rotate erratically.
• Sensor Calibration Problems: If the cutter uses a sensor to control position or attitude, the sensor may be inaccurately calibrated or the sensor itself may be faulty.
• Improperly Set Motion Parameters: Parameters such as RPM, acceleration, etc. may need to be adjusted to ensure smooth rotary motion.
• External interference: External factors such as wind, vibration, etc. may cause the pipe to oscillate during rotation.
• Uneven material: There may be unevenness or internal stresses in the pipe material that cause instability during rotation.
• Lack of auxiliary support: Steel pipe ends do not have sufficient auxiliary support to maintain stability during rotation.
• This problem is particularly acute in H-beam and channel cutting. Conventional Cutting